Pneumatyka Siłowniki pneumatyczne Napędy pneumatyczne Elektrozawory Armatura pneumatyczna Zawory pneumatyczne Zawory sterujące Filtry pneumatyczne Filtry pneumatyczne Stacje przygotowania powietrza Sprężarki tłokowe i śrubowe Zawory rozdzielające

Pneumatics, Compressors, Dryers, Tanks, Pneumatic installations, Air prepration units, Gauges, Pneumatic tubes, Pneumatic valves, Pneumatic cylinders, Pneumatic fittings.

General information about pneumatic fittings

Push-in, plastic fittings and couplings:

push-in fittings dedicated for plastic pneumatic hoses are used to connect the pneumatic installations and also they are used to connect other pnaumatics elements. Their easy construction and high quality and veary good sealings guarantee easily, quick and tight hoses connection.
The hoses, that are used for pneumatic installations are made from:

  • Polyamide,
  • Polyethylene,
  • Polyurethane,
  • PVC.

The hose is sealing takes place when the cutted hose is ending is put inside the fitting hole till the resistance is felt. Once the dissconnetion is required, the blue ring on the fitting has to be pushed and kept as long as the hose is taken out.
Straight push-in fittinge can be screwed by using hexagonal wrench in places where access is hard./p>

Technical data:
Working medium: compressed air or other non agressive gasses (underpressure as well)
Operating temperature range: -18°C up to 70°C
Maximum working pressure: 15 bar

Universal fittings for Cu pipes :

Universal connectors for reliable design are used for pneumatic installations by pipes made from copper, steel, aluminum and plastic. Pipe’s sealing in the fitting is realized by means of a clamping ring (barrel).

Technical data:
Working medium: compreed air or other non-agressive gases, water, non-agressive liquids
Working temperaturę range: 0°C up to 80°C
Maximum working pressure: 20 bar

Quickfittings and nipples:

Quickfittings and nipples are dedicated to quick connect and disconnect the hoses in the pneumatic installations. After hose disconnection the working medium flow is cut of immediately which does not cause the loose of pressure in the installations.
Quickifittings and nipples are dedicated especially to connect the pneumatic tools and are also commonly used in the car garages.

Technical data:
Working medium: compressed air or other non-agresive gases, water, non-agressive liquids
Temperature range: 0°C up to 80°C
Maximum working pressure: 20 bar

Pneumatic accessories:

Pneumatic accessories include a wide range of ancillary components used to connect the pneumatic control system components. They allow for the distribution of the working medium between the receivers and assembling the pneumatic installations. The range of accessories consist of : straight and angled connectors, reducers, couplings bulkhead, muffs, tees, crosses, manifolds, plugs, silencers and connectors.

Accessories are available in sizes with male or female threads from M5 to G1 '. These elements are used for connecting the pneumatic systems made of hoses (polyethylene, polyamide, nylon, Teflon) and plastic or steel tubes. Moreover, they are used as for pneumatic cylinders and control valves.

Silencers should be used in pneumatic systems to reduce operating noise of components (spool valves during venting). They fulfill the role of additional security elements from entering the interior of contaminants from the environment during operation. Can be equipped with a flow control function which allows you to control rooms movement speed pneumatic drives.

Shut –off ball valves:

The shut-off ball valves are made for manual close of working medium flow in the industrial installations. Their main advantage are: small size and possibility to assemble directly on hoses made from copper, polyamide , nylon etc (only with tgether with the connector).

Technical data
Working medium: compressed air or other non-agressive gasses and non-agressive liquids
Working temperature range: 0°C up to 80°C
Maximum working pressure: 10 bar

Offer

The Design Departament

Dział projektowy HAFNER PNEUMATYKA

General Pneumatics

General informations about pneumatics

A Reliable company

Rzetelna firma HAFNER

General trade conditions

HAFNER Pneumatyka

ABOUT US

HAFNER
Pomagier-Trzebuchowscy
Spółka Jawna
ul. Marii Skłodowskiej-Curie 97
87-100 Toruń

NIP 556-22-23-819
Regon 092307860
KRS 0000154149

Santander Bank Polska SA

79 10901069 0000 0000 0704 8941

Bank account ING Bank Śląski

64 10501139 1000 0023 4975 0618

Generatory azotu

Generator azotu i tlenu

Choose the branch

UTRZYMANIE RUCHU

UTRZYMANIE RUCHU

Cylinders production

Produkcja siłowników 24h

PARTNERS