HAFNER Pneumatyka
Pneumatyka Siłowniki pneumatyczne Napędy pneumatyczne Elektrozawory Armatura pneumatyczna Zawory pneumatyczne Zawory sterujące Filtry pneumatyczne Filtry pneumatyczne Stacje przygotowania powietrza Sprężarki tłokowe i śrubowe Zawory rozdzielające

Pneumatics, Compressors, Dryers, Tanks, Pneumatic installations, Air prepration units, Gauges, Pneumatic tubes, Pneumatic valves, Pneumatic cylinders, Pneumatic fittings.


Charakterysyka medium roboczego

Characteristic of the working medium

1m3 of atmospheric air contains:

  • 140 mln pollution participles, which equals on average from 0,005 up to 0,020 g/m3 and in the particulary dusty regions even up to 0,1 g/m3,
  • 10 mg of oil,
  • About 11g of steam.

According to above features it has to be specially prepared in order to be used in the pneumatic systems and drives. The professional preparation of compressed air consist of:

  • all solid and liquid contaminants,
  • reducing pressure to the required value,
  • making lubrication for devices that require it..

Properties of cleared and correctly prepared compressed air:

  • Lack of water as drops of water, water as steam is permitted, only on condition when the dew point occurs at the temperature for 5-10°C lower that the lowest operating temperature of the system,
  • Occurrence of mechanical contaminants of principle size above 10µm,
  • Absence of oil as drops.

Advantages and disadvantages of compressed air as a working medium

Pneumatics as a branch of science is being used so widely, because of the type of working medium. It has a lot of advantages , which are listed below :

  • common and almost unlimited availability of renewable working medium
  • low viscosity, which guarantees low flow residence, which enables you to design propulsion systems with high-speed line (to 30m/s),
  • damps the variation,
  • it gives you the possibility of stepless operation of pneumatic drives:
    - speed linear and rotary of pneumatic drives are moved by adjusting the flow rate of the working medium,
    - orces and moments useful cylinders by adjusting the pressure of the working medium
  • low sensitivity and resistance to changing load - overload drive is stopped
  • high durability and easy operation of elements of the compressed air in a wide rang
  • of operating temperatures at a relatively low cost of use and operation,
  • no need for discharge lines working medium,
  • resistance to the influence of external electromagnetic fields
  • air is a medium that is safe, clean and ecological in operation –there is no danger of electrocution and does not pollute the environment even in the case of the system damage,
  • compressed air is easy to transport over long distances wires and also it is easy to be stored.

According to compressed air features, it has some disadvantages, which are listed below:

  • it has to be cleared from solid and liquid contaminants,
  • during the air pressure change, as well as when changing its temperaturę,the water is precipitated,
  • compressibility of working medium (air) is about 2000 times higher than the hydraulic oil compressibility
  • positioning and simultaneous movement of the drive's elements
  • limiting the scope of useful forces and moments generated by the operating pressures (up to 10 bars)
  • limited length of the linear motion due to the technical possibilities of stroke
  • high costs of manufacturing the working medium and the possibility of leaks in the circuit transmitting working medium.


The Design Departament

Dział projektowy HAFNER PNEUMATYKA

General Pneumatics

General informations about pneumatics

A Reliable company

Rzetelna firma HAFNER

General trade conditions

HAFNER Pneumatyka


sp. z o.o.
ul. Marii Skłodowskiej-Curie 97
87-100 Toruń

NIP 556-22-23-819
Regon 092307860
KRS 0000154149

Santander Bank Polska SA

79 10901069 0000 0000 0704 8941

Bank account ING Bank Śląski

64 10501139 1000 0023 4975 0618


Fundusz Europejski

Fundusz Europejski


We have become part of the Rubix Group

We have become part of the Rubix Group

Hafner w czasie pandemii

Hafner w czasie pandemii

Generatory azotu

Siłowniki dla hutnictwa

Siłowniki pneumatyczne WSRK


Centrum Serwisowo Projektowe

Cylinders production

Produkcja siłowników 24h